Pressure vessel steel

Heat-resistant steels – DIN EN 10273, in accordance with AD Leaflet W0/W10 and W13

Acceptance APZ 3.2 TÜV / impact strength values -50 at least 27 J / impact strength values -60 degrees at least 27 J / hot tensile test 400 degrees

T/W/StE355	1.0565	Rolled	EN 10060	Round	30 – 200 mm
P355NH/QH1	1.0565/1.0571	Rolled	EN 10060	Round	30 – 200 mm

Heat-resistant steels – DIN EN 10221-1, DIN EN 10222-4, DIN 17103, in accordance with AD Leaflet W0/W10 and W13

Acceptance APZ 3.2 TÜV / impact strength values -50 at least 27 J / impact strength values -60 degrees at least 27 J / hot tensile test 400 degrees

T/W/StE355	1.0565	Forged, rough-turned -0/+3 mm	DIN 7527/6	Round	210 – 600 mm
P355NH/QH1	1.0571/1.0571	Forged, rough-turned -0/+3 mm	DIN 7527/6	Round	210 – 600 mm

Low-temperature and pressure vessel steel – DIN EN 10273 in accordance with AD Leaflet W0/W10 and W13

Acceptance APZ 3.2 TÜV / impact strength values -50 at least 27 J / impact strength values -60 degrees at least 27 J / hot tensile test 400 degrees

P460NH

1.8935

Rolled

EN 10060

Round

40 – 150 mm

Low-temperature and pressure vessel steel – DIN EN 10222-1, DIN EN 10224-4, DIN 10273 in accordance with AD Leaflet W0/W10 and W13

Acceptance APZ 3.2 TÜV / impact strength values -50 at least 27 J / impact strength values -60 degrees at least 27 J / hot tensile test 400 degrees

T/W/StE460	1.8935	Forged, rough-turned -0/+3 mm	DIN 7527/6	Round	160 – 500 mm
P460QH	1.8932	Forged, rough-turned -0/+3 mm	DIN 7527/6	Round	160 – 500 mm
P420NH	1.8935	Forged, rough-turned -0/+3 mm	DIN 7527/6	Round	160 – 500 mm

Bar steel in accordance with ASTM A350 LF2, ASTM A961, ASTM A370, ASTM A388, NACE-MR 0175

Acceptance test certificate EN 10204/3.1 / impact strength values -46 degrees at least 27 J

A350 LF2 (Class 1)	–	Rolled	EN 10060	Round	30 – 200 mm
A350 LF2 (Class 1)	–	Forged, rough-turned -0/+3 mm	DIN 7527/6	Round	210 – 600 mm

Bar steel in accordance with ASTM A350 LF6, ASTM A370, ASTM A388, NACE-MR 0175

Acceptance test certificate EN 10204/3.1 / impact strength values -46 degrees at least 27 J

A350 LF6 (Class 1)	–	Rolled	EN 10060	Round	40 – 150 mm
A350 LF6 (Class 1)	–	Forged, rough-turned -0/+3 mm	DIN 7527/6	Round	160 – 500 mm

Bar steel – DIN 17243, DIN EN 10273 in accordance with AD Leaflet W0/W10 and W13, NACE-MR 0175

Acceptance test certificate EN 10204/3.1 / impact strength values -46 degrees at least 27 J

C22.8	–	Rolled	EN 10060	Round	50 – 150 mm
P250GH		Rolled	EN 10060	Round	50 – 150 mm
C22.8	–	Forged, rough-turned -0/+3 mm	DIN 7527/6	Round	160 – 400 mm
P250GH		Forged, rough-turned -0/+3 mm	DIN 7527/6	Round	160 – 400 mm

Bar steel in accordance with ASTM A105, ASME A 105, NACE-MR 0175

Acceptance test certificate EN 10204/3.1 / impact strength values -46 degrees at least 27 J

A 105	–	Rolled	EN 10060	Round	50 – 150 mm
A 105		Forged, rough-turned -0/+3 mm	EN 10060	Round	160 – 400 mm

Structural steel EN 10025/2005 in accordance with AD Leaflet AD 2000 W 13

Acceptance test certificate EN 10204/3.1 / impact strength values -20 degrees at least 27 J

S355J2+N

1.0570

Rolled

EN 10060

Round

25 – 320 mm

Alloyed tempered steels – DIN EN 10083

Impact strength values -20 degrees at least 27 J / Impact strength values -40 degrees at least 27 J

34CrNiMo6+QT	1.6582	Rolled	DIN EN 10060	Round	20 – 200 mm
34CrNiMo6+QT	1.6582	Forged, rough-turned -0/+3 mm	DIN 7527/6	Round	340 – 540 mm
42CrMo(S)4+QT	1.7225/1.7227	Rolled	EN 10060	Round	20 – 290 mm
42CrMo(S)4+QT	1.7225/1.7227	Rolled, peeled -0/+3 mm	EN 10060	Round	300 – 330 mm
42CrMo(S)4+QT	1.7225/1.7227	Forged, rough-turned -0/+3 mm	DIN 7527/6	Round	340 – 800 mm

We have TÜV Süd restamping certification for products as stipulated in the Pressure Vessel Directive 2014/68/EC. Acceptances GL, BV, LRS, DNV, etc. are possible.